- Place of Origin: Guangdong, China (Mainland)
- Brand Name: Fly Sky
- Model Number: 1070017
- Power Supply: rechargeable battery
- Model type: Radiolink-T6HP-E
Packaging & Delivery
|Packaging Details:||Carton: parcel with air bubble.|
|Delivery Detail:||3~7 days by Fedex / EMS , 10~20days by register air mail .|
Specifications2.4G 6CH Transmitter
2.Receiver requirement:4.8v -6v
Thank you for purchasing the Radiolink digital proportional R/C helicopter system. If this is your first computer radio. Rest assured that it is designed to make initial setup and field-tuning of your helicopter easier and more accurate than would be if using a non-computer radio. Although this is a beginner or sport system with the requirements of those flyers in mind in order to make the best use of your Radiolink T6EHP-E and to operate it safely, you must carefully read all of the instructions .Suggestion :if ,while reading the instructions ,you are unclear of some of the procedures or functions and become stuck ,continue to read on anyway. Often ,the function or procedure will be explained again? later in a different way providing another perspective from which to understand it. Another suggestion is to connect the battery ,switch? and servos to the receiver and actually operate the radio on your workbench as you male programming changes. Then, you will be able to see the effects of your programming inputs.
Throttle hold switch- This switch operates to hold the engine in the idling position and disengaged it from the Throttle stick. It is commonly use to practice auto- rotation.
Neck strap hook- Mounting point for optional neck strap.
Aileron / Throttle control stick- Operates the servos connected to channel 1 ( aileron ) and channel 2 ( throttle ) in the receiver.
Trim levers ( all ) C Used to shaft the neutral or center position of each servo.
Note: The throttle trim lever is intended for fine turning the throttle servo when the engine is at idle. Throttle trim dose not affect the throttle servo when the throttle control stick is all the way up ( so idle r. p. m. can be adjusted without affecting throttle settings through the rest of the stick movement )
DATA INPUT Button- Used to change the values of the various functions displayed on the LCD screen
Liquid C crystal display screen (LCD) C Displays programming modes and values entered .MODE key C Used to display the values for the current function.
SELECT Button C Used to display the values for the current function.
Throttle / Rudder control stick C Operates the servos corrected to channel 3 ( throttle )and channel 4 (rudder) in the receiver.
Idle up (Gyro) switch CThis switch operates to change the flight condition which is set the throttle Curve and pitch of mid air maneuvers ( rolls, loops stall turns) and 3D flight. When you change the Idle up switch, the gyro sense will be changed to Idle setting too. So you dont need to operate 2 switch (Idle up and Gyro sense switches ) while you want to change to 3D flying situation.
Antenna-Radiates signals to the receiver, Never fly a model without fully extending the antenna or you may create interference to other modelers and decrease operational signal range of the transmitter. The antenna may be removed and replaced with another in case it is inadvertently broken.
CONTENTS AND SPRCIFICATION
- T6EHPE Transmitter with 6-model memory.
- Transmitting on 2.4GHz band
- Operating system:2-stick,6-channel system
- Modulation: FHSS
- Power supply :9.6v Ni- Cd battery or 12v alkaline battery
- Current drain:70mA
- R6F narrow band,2.4GHz 6 channel receiver
- Receiver requirement:4.8v -6v
- Current drain:9.5mA 4.8v
Package Content :
- 1 x 6 Channel 2.4G 6CH Transmitter
- 1 x 6 Channel 2.4G Receiver